Main controller
To power up any GOcontroll Moduline controller, a minimum of three electrical connections must be made. These connections provide ground, supply voltage, and the required enable/activate signal.
K31 – Ground
A stable ground reference must be connected to at least one K31 pin. Each controller provides multiple K31 ground pins on the main IO connector.
K30 – Supply Voltage
The controller must be powered via the K30 supply input. The K30 pins must be fused appropriately and connected before enabling the device.
K15 – Enable Input
The enable/activate input K15 must be pulled high > 8VDC activate and start the controller. If the controller has multiple K15 input pins, at least one of these three should be pulled high.
Controller specific pinout overview
