Important notice
When programming your GOcontroll Moduline controller, the following guidelines must be observed to ensure reliable and predictable operation.
Do not mix Simulink module blocks with Node-RED module nodes
If GOcontroll Moduline modules are used in Simulink, they must not be used simultaneously in Node-RED. Both environments attempt to access the same hardware interfaces, causing conflicts that can lead to unpredictable or incorrect behavior of the modules.
Choose an appropriate sample time for output modules
When using output-based modules such as the 6-Channel Output Module, 10-Channel Output Module, or 2-Channel Power Bridge Module the sample time is critical. This applies to Simulink, Node-RED or another programming method.
The sample time contributes to the safe and stable control of actuators. Always select a sample time between 200 ms and 10 ms.
