Login
The Web UI is a web based service that can be used to configure your GOcontroll Moduline Controller but It can also be used to read fault codes and parameterize your control software.
To login to the Web UI, a wired ethernet and/or Wi-Fi connection is mandatory. Independent the type of connection, it is important to know the IP address of the controller.
Note: Controllers delivered before August 2025 do not have the Web UI installed by default. Please contact support@gocontroll.com to discuss the possibilities for updating your controller.
Login to the Web UI
For this example we use the wired ethernet connection. We discovered that the IP address of the controller was: 192.168.1.16 Use your preferred web browser to access the Web UI. For this example we use Microsoft Edge.
- Browse to your controllers IP address followed with the Web-UI port: 192.168.1.16:5000
- Password: Moduline
- Click: Log in
Once login is succesfull, you should see something like this:
